How to make an Electrical board
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjw9FBC00EtjGWX2yJe5GMb0ZYvYAJXBNbj2o8Oxg1j5F1yQ_anQX6CKRvqFoeCP7L_quuR39HwvG8lzYL-LunenXcRSeXqOOjCWXWEmPN7GQ2RGgh0zJ2hBtc69RHkzGAP-cPEAtltIE5y/s200/2012-12-03+11.09.57.jpg)
As you can see that an electrical board has a three fan dimmer and a nine switch buttons.the following image shows the wiring of this board.in the following image you should wire exactly as shown.in this board there is not any socket so there will not any neutral wire be used.
But there should be neutral wire to complete an Electrical circuit, so the neutral wire will be used directly to the Electrical appliances such as Fans , Electrical Bulbs and Energy savers etc.
The red wire is the phase wire.and the empty points of copper metal are the phase points going towards the electrical appliances such as tube light , electrical bulbs,etc. where as the neutral will be directly supplied to electrical appliances.
Now there is another Electrical board.in which as you can see that there are four buttons, two sockets and one fan dimmer.The upper button is for a fan which is linked to fan dimmer.this button is used to turn on and turn off a fan.whereas the dimmer associated to that button is used to control the speed of the fan.
on the other hand the two out of there buttons are used to switch on and switch of their linked sockets.
and the last one button is used to control electrical appliances.in the sockets the neutral wire is used.
on the other hand the two out of there buttons are used to switch on and switch of their linked sockets.
and the last one button is used to control electrical appliances.in the sockets the neutral wire is used.
No comments:
Post a Comment